Zu Produktinformationen springen
1 von 9

TTArtisan

TTArtisan Light Meter Brass Two Dial Compatible with Cold Shoe

TTArtisan Light Meter Brass Two Dial Compatible with Cold Shoe

Normaler Preis $78.00
Normaler Preis $78.00 Verkaufspreis $78.00
Sale Ausverkauft
inkl. MwSt. Versand wird beim Checkout berechnet
Color

Niedriger Lagerbestand: 10 verbleibend

The TTArtisan meter is a small, lightweight accessory meter with 2 dial to adjust ISO, aperture and shutter speed, and it weighs only 35g, it serves well for people who use older Leica and similar rangefinder cameras.

  • Compact and lightweight: The TTartisan meter is a small, lightweight accessory meter that weighs only 35g, it serves well for people who use older Leicas and similar rangefinder cameras.
  • Shoe-mount design: The meter conveniently slips into the camera's shoe while readings are taken.
  • Two dials: one for ISO and aperture and another one for shutter speed allow settings to be made.
  • LED indicator: A series of LEDs illuminate to tell the user when the correct measurement has been achieved.The TTartisan meter is available in silver or black colours. 









Vollständige Details anzeigen

Customer Reviews

Based on 4 reviews
50%
(2)
50%
(2)
0%
(0)
0%
(0)
0%
(0)
R
Richard Hillbun

This a a terrific accurate little light meter. I've checked the accuracy against two other light meters and it was very close. I love the small size. It fits right on to the flash shoe on the top of the camera. Easy operation just adjust one of the two knobs until you get a green light. It can give you a one over or under exposure setting. For what it is and for the money it's a good accessory to add to your other photographic kit.

C
CMarq

Good light meter, used it on my Fuji 6x9 and it worked great! Usually don’t use light meters but I always like to have one. Ran a couple rolls using only the light meter telling me if my light was evenly exposed and the images came out good!

V
Vicky Medhurst

This light meter is a decent value for the cost. It’s convenient that’s it’s small and can slide into your camera’s cold shoe mount, however the screws on the plate that slides into the camera’s cold shoe get loose over time and you have to continually tighten them with the included screw driver. It runs on CR2032 batteries which are easy to find and it doesn’t use much power so they should last a long time.The shutter speed dial clicks nicely, but the aperture dial turns smoothly though with some resistance. It’s the ISO slot which also turns smoothly but with no resistance which ended up ruining some of my pictures from being bumped.But if you set everything properly, you will get well exposed photos in good lighting situations. You should be aware that in high contrast situations, the light meter tends to expose for the shadows so you might need to take that into consideration when you want dark shadows. See my attached photos as examples of this

K
Kodachrome man

I have been using the well known Voigtlander VC Meter II in my Leica film cameras. Been accurate enough and is handy sitting in shoe ready for use when lighting is out of my sunny 16 knowledge.Have had two problems however with the two I have had. One is the battery door coming loose easily, the other is fit in camera shoe is not tight enough. One I lost as I did not know it dropped off camera. Not fun at the price of those meters.Enter the 7 Artisan, came across it accidentally, looked like a nice alternative at a great price so ordered a black one from Amazon for my black Leica M4-P. My tests today, TTartisan against the VC meter show the same readings in overcast outdoor light and low level indoor light. Plus the TTartisan fits camera shoes tighter so no worries about falling out. No worry about battery either as a small screw (screwdriver included) holds the battery door.Negatives? Well the battery door screw is a bit of a pain to put in along with included washer, but worth the trade off of not picking batteries off sidewalk. The print is smaller than the VC II but stands out well on the black version at least and is not a problem for me to read. The ISO setting can be changed accidentally more easily than the VC II as someone else mentioned, but that is only if one hits the little ISO setting protruding post. I don't think that will be a problem in use for me but thanks to that heads up will keep an eye on the ISO setting.Overall highly recommend over expensive VC II. Will post again if reliability becomes a problem but general nice fit of components leads me to believe it is well made.